Dot Legal 4 Point Harness
The second most notable difference between a single-track configuration and a dual-use configuration is the wiring harness. Only factory 3-point seat belts and DOT-approved 4-point ASM belts are legal for road use. 5- and 6-point belts are dangerous to use without a roll bar/roll cage, so they are not approved for the road. However, you can still install them as long as you don`t use them on the street. Aftermarket seats (i.e., non-OEM or factory seats) fall into two categories: adjustable seats and non-adjustable seats, also known as bucket seats with fixed or fixed backrests. The most striking difference between them is – you guessed it – the first leans while the second does not sit still. But that`s not the only difference. Other important differences include variations in support, weight, harness compatibility, and safety ratings. Ideally, everyone in the racing equipment market would buy and install everything at the same time to make sure everything works together. Unfortunately, it`s not an option for most people to buy seats, straps, helmets, and other safety equipment at once. Most prefer to buy these coins in increments. If you`re part of that crowd, take heart! They are in good hands.
Just follow the steps below to make sure that every purchase you make brings you closer to a safe and enjoyable track experience. The shoulder straps come with wrapped B23C bolt holders that can be easily removed to wrap a roll bar or belt rod. With a special show car, just about anything goes. We recommend a harness rod and any type of racing harness to get that race-inspired look without the cost associated with a functional cage and seat configuration. However, if you plan to use your show car on the track or on public roads, remember that you need to consider the factors mentioned in the previous sections. Refunds take 30 days or less. Payments made by credit card or PayPal will be refunded to the original account used during the transaction. There are no cash returns; We will issue a company cheque for the repayment of funds. Refunds are decided by management and not by sales staff.
Cancelled service appointments with deposits are non-refundable. The advantages of mounting a 4-point wiring harness on the aftermarket at warehouse assembly sites are manifold. First of all, you should know that these points have been subjected to a load test. This means that your vehicle manufacturer has designed the dots in such a way that they can withstand truly amazing forces for a while. Clearly, this means that the screws do not come out of the sheet. You have 14 days to review your submission and content. After this period, IAG is no longer responsible for missing items. You have 30 days to report damaged or incorrect items, after which IAG will no longer be responsible for returns or exchanges. All products in stock are subject to a 30-day return policy. Items, if approved for return, are subject to a 20% restocking fee.
A 20% cancellation fee may be charged for cancelled orders. All product returns require a return authorization number before being returned to IAG or the manufacturer. You can obtain an „RMA“ number by calling the IAG Help Desk at 410-840-3555 or by emailing support@iagperformance.com. Some products may need to be returned to the manufacturer for inspection before a return or exchange can be processed. Some products may not be returnable. Products that have been modified or installed cannot be returned. There are no returns or cancellations for special orders/made-to-order items and electrical components (including the COBB access port). Items returned without an RMA after the expiry of the 30-day return period will be rejected. Cancelled service appointments with deposits are non-refundable. The SCHROTH QuickFit strap has the respective make and model of the vehicle printed on the rear belt label. Unlike most other aftermarket harness belts, most road-approved SCHROTH belts have a unique separation function between the front part of the harness and the rear belt. If you do not use the approved SCHROTH belts, they can be cleared so that all passengers can fully access them and take full advantage of all the factory`s seat belts.
The most important and notable difference between a dedicated chain cart and a car configuration for dual work is the roll cage. A car driven on the road can never have a roll cage. Indeed, if you drive on public roads, wearing a helmet is illegal. And because you can`t wear a helmet, it`s extremely dangerous to ride in a roll cage (imagine banging your head against a steel pipe at 80 miles per hour). The best thing to do for the track is a roll bar; It is essentially a half-cage fully positioned behind the driver, with the main tire running through the ceiling behind the driver`s head (as usual), but without pipes positioned near the A-pillar (or near the sides of the driver`s head). As long as the roll bar is padded and positioned far enough behind the driver`s head, it can be used on the road. A 5- or 6-point harness, on the other hand, offers a higher level of protection and is a must for dedicated race cars. However, it must be used next to a roll bar or roll cage. This is because you sit up with a 5- or 6-point harness during a rollover accident. In case your roof curls, all the weight of the car rests on your head. Needless to say, it could be deadly.
A roll bar or roll cage would prevent the roof of your car from collapsing, so the two should always be used together. The ideal configuration for a dedicated race car is a full roll cage with FIA-approved bucket seats with a fixed backrest, five- or six-point belts, a helmet and a HANS device. With this setup, you no longer need your standard airbags or seat belts. In fact, they could do more harm than good, so it`s best to disable or remove them. While you may deviate from the ideal setup to some extent, keep in mind that any deviation you make is a compromise, so you should strive to stay as true to it as possible. If you`re looking for some leeway, you can make four acceptable changes: adjustable seats (instead of bucket seats), 4-point ASM (anti-submarine) straps (instead of 5 or 6), a roll bar (instead of the full cage) and, if you wish, skip the HANS device. The main guidelines to remember are: (1) always wear your helmet in a roll cage and (2) never install a racing belt without a roll cage/roll bar. The harness should always be used with a roll cage or roll bar. The lap belts that come with this harness are only available with bolted material (they are sewn) as they are most often needed in configurations that require road approval.
If you require a different configuration, please call (844) 438-7244. Fixed bucket seats are also more often built with housing for racing belts; If you plan to install a 5- or 6-point harness, you will need two holes behind your shoulders and one between your legs for the straps to pass. While some reclining seats come with these features, they don`t always do, so keep that in mind. This limited warranty gives you certain legal rights and you may also have other rights that vary from state to state. We limit the duration and remedies of all implied warranties, including, but not limited to, warranties of merchantability and fitness for a particular purpose, to the duration of such express limited warranty. Some states do not allow restrictions on the duration of an implied warranty. The remedies described below are your sole and exclusive remedies and our entire liability for breach of this Limited Warranty. In no event shall our liability exceed the amount actually paid by you for the Product, and in no event shall we be liable for any consequential, incidental, special or punitive damages or losses, direct or indirect.